Features: 性能特點
l Up to +/- 7000V(DC+Peak AC) Differential
l Bandwidth up to 70MHz
l Safety Certified
l Overrange Indicator
Applications: 應用
l High Voltage Floating Measurement
l Voltage Surge Measurement
l Electronic Ballast Design
l Power Electronics System Design
技術參數
Bandwidth
DC to 70MHz (-3dB)
Attenuation
1:100/1000
Accuracy
+/- 2%
Rise Time
<5ns
Input Impedance
50Mohm//10pF each side to ground
Input Voltage
-Category
CAT I
-DifferentialRange*
+/- 700V(DC+AC Peak) and 500Vrms @ 1/100 +/-7000V(DC+AC Peak) and 5000Vrms@1/1000
-CommonModeRange*
+/-7000V(DC+AC Peak) and 5000Vrms @1/100 & 1/1000
-Absolute Max. Voltage*
Output Voltage
- Swing (into 50kohm load)
+/-7V
-Offset (typical)
<+/-5mV
-Noise (typical)
0.9mVrms
-Source Impedance (typical)
50 ohm (for using 1Mohm input system oscilloscope)
CMRR (typical)
-80dB @50Hz, -60dB @20kHz
Ambient Operating Temperature
-10 to 40 degree centigrade
Ambient Storage Temperature
-30 to 70 degree centingrade
Ambient Operating Humidity
Up to 85% RH
Ambient Storage Humidity
Power Requirements
-Standard
4xAA cells or 6VDC/200mA mains adaptor** or regulated 9VDC/120mA mains adaptor**
-Options
Power leads
Length of BNC Cable
90cm
length of Input Leads
60cm
Weight
500gms
Dimension(LxWxH)
202mm x83mmx38mm
*Voltage limit is the lesser of the DC+AC Peak and RMS values. ** a. The supplied voltage must be less than 12V and greater than 4.4V, otherwise the probe could be damaged or can't be operated properly. b. polarity is "+" inside and "-" outside. For wrong polarity, built-in circuit protects the probe, no danger or damage will occur. c. When the voltage of the cells become too low, the power indicator on the panel will flicker.
主要銷售：LCR測試儀,,信號發生器,數字存儲示波器,絕緣電阻測試儀扭力扳手扭矩扳手耐壓測試儀直流電阻測試儀數字電橋等等測量儀器，測試儀器，工具等。（點擊關鍵詞可進入相關產品目錄）扭力測試儀瓶蓋扭力測試儀數字電橋,扭力扳手
咨詢專線:
在訂貨前*好還是致電我們，以確定貨期和數量。
咨詢電話：021-530842187 -111
專線： / 包小姐/景小姐
本標題頁面：SI-9010A差分探頭
滬公網安備 31010102004806號
